MOT-Forum
August 19, 2019, 05:42:22 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
  Home   Forum   Help Search Calendar Media Articles Suppliers Products Links About Us Login Register  
Pages: [1]
  Print  
Author Topic: New to forum  (Read 63 times)
jwmiller
Newbie
*
Posts: 2


View Profile
« on: August 04, 2019, 10:41:54 PM »

Good evening everyone!  Just wanted to introduce myself.  My name is Jeff and i'm in the Dallas area and I own a 1976 Austin Mini.  Currently torn apart, i'm rebuilding the engine and have heard Kip motors is a reputable shop to go to.  I need to get the cam bearings replaced and i'm thinking of taking it there. 
A little bit about the car:
Right hand drive import from New Zealand, 2-piece carbon fiber front end, 1275 bored .010 over, front and rear sway bars, and coil springs instead of cones with gaz shocks.  Car has been sitting for years and i'm finally getting around to getting her back on the road.
Attached is the car back in 2005 and then how it sits currently (sadly)...
https://photos.app.goo.gl/m7TmmbrDNkGwcvg56
https://photos.app.goo.gl/m8kSCmpp8WCizQWs9
Logged
Wings
Full Member
***
Posts: 133


Such a little car; so much to learn!


View Profile
« Reply #1 on: August 06, 2019, 04:26:51 PM »

Hi Jeff,

My Mini is at Kip Motors right now. They rebuilt the head, fixed a sticky oil pressure relief spring, tweaked the Weber and adjusted the timing. It's supposed to be ready this weekend after an alignment and a few other adjustments.
I've heard good things about them and I hope that I can recommend them after I get the car back. I will warn you it make take a while before you can get your car into their shop. I believe I waited about three months for an opening. Things happen slowly too but I don't mind if the results are worth the wait. Good luck with your Mini.

Paul
Logged

2013 JCW Chili Red/Chili Red
1991 Mini Cooper Red/White 'Matchbox'
jwmiller
Newbie
*
Posts: 2


View Profile
« Reply #2 on: August 13, 2019, 09:32:45 PM »

Thanks for the info, Iíll have to try and get over there this week to check out the shop and have a chat. 
Logged
Wings
Full Member
***
Posts: 133


Such a little car; so much to learn!


View Profile
« Reply #3 on: August 16, 2019, 03:57:58 PM »

If you visited before yesterday afternoon (8/15)you probably saw my red '91 Cooper. If you didn't, well, it's parked back in my garage today.

Originally I planned to get the car on Saturday but a few days before that the shop discovered some badly worn ball joints. As along as it was there they ordered the necessary parts and got to work earlier this week. The alignment was rechecked and I picked it up late yesterday. It was a toasty ride back up to McKinney but it was great to have the car back. The rebuilt head and new head gasket found some much needed horsepower while the new front end pieces tightened up the steering noticeably. They fixed a low oil pressure issue, tracked down some rattles in the dash, massaged the Weber and fixed a fuel tank vent issue.

The final bill was a little steeper than I would have liked but they did a good job and fixed quite a few things so I can't complain. If you do stop by for a tour of the shop, tell them Paul W. says hello.

Paul
Logged

2013 JCW Chili Red/Chili Red
1991 Mini Cooper Red/White 'Matchbox'
Pages: [1]
  Print  
 
Jump to:  


Powered by MySQL Powered by PHP Powered by SMF 1.1.2 | SMF © 2006-2007, Simple Machines LLC
SimplePortal 2.3.2 © 2008-2010, SimplePortal

SMF customization services by 2by2host.com
Valid XHTML 1.0! Valid CSS!