MOT-Forum
December 09, 2021, 05:39:30 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
  Home   Forum   Help Search Calendar Media Articles Suppliers Products Links About Us Login Register  
Pages: [1]
  Print  
Author Topic: AutoX Mini update  (Read 609 times)
John Lieberman
Administrator
Sr. Member
*****
Posts: 263


AutoX Mini


View Profile
« on: April 01, 2021, 10:14:09 PM »

I got the permanent fuel cell mount secured in the spare tire well of the AutoX car and the fuel cell mounted to it.  Piece o' cake and it works like a charm.

Next project was to replace a leaking freeze plug in the block.  No prob there.  But I had to order some from England because I couldn't find any of the same design here in the U.S.

After that, the next project was replacing the HS2 (1-1/4 inch) carbs, that have been on the car since I built it back in the late '80s, with HS4s (1-1/2 inch).  Had to order a new manifold and, when I got it, had to take it to the machine shop to get it grooved out for the locating rings.  Did a test fit today and discovered that I've got interference between the manifold and the center tube of the LCB, so I'm going to have to do a little bit of grinding to get everything to fit properly.

If it ain't one thing, it's another!!!
 
Logged
Pages: [1]
  Print  
 
Jump to:  


Powered by MySQL Powered by PHP Powered by SMF 1.1.2 | SMF © 2006-2007, Simple Machines LLC
SimplePortal 2.3.2 © 2008-2010, SimplePortal

SMF customization services by 2by2host.com
Valid XHTML 1.0! Valid CSS!